DIY Home Depot Bicycle Headlamp
How to make a nice pair of halogen bicycle headlamps using only materials available at Home Depot...a 20 watt low beam and a 50 watt high beam with MR16 Halogen Spot bulbs. Note: Floods don't give you enough range at speed and you want to get the bulbs that have a flat piece of glass at the front. Thanks Jake! Link.
Posted by Phillip Torrone |
Sep 1, 2005 02:52 AM
DIY Projects |
Permalink
| Comments (12)
Recent Entries
- Call for papers -- The Hacking Tradition: Lead Users in Pervasive Computing
- Site maintenance
- Film can cannon, binge-drinking snacks on bbtv
- Give the gift of tools - Make:tools!
- NES stuck inside its controller
- Make:NYC Meeting 2! at Make:NYC (tonight)
- Arduino Sketchup model!
- Octopart's new PartList
- Japanese competition robot father/son team
- Dollar store parabolic microphone
Comments
Oldest comments listed first.
This looks really neat, but no mention of what he powers it with. Am I supposed to know that? I.e. I know 10W halogen is a standard bike light size - is there a 'typical' rechargeable source for that? I asked the author directly and if he responds I will post.
You can calculate it pretty easily. Any good-size 12-ish volt battery pack ought to be able to run it for quite some time. 10W at 12V is just shy of 1 amp, so say 1A, just to have some margin of error. If you find a 12 volt battery with 5AH of juice, it'll run that light for approximately 5 hours. A 9 volt RC-car battery pack would probably work, but the light might be a bit dim. Those are commonly available and have ready-made chargers all set to go (or you could make your own very simply).
-Jesse
I emailed the author and apparently he uses a 12v7Ah battery. I mentioned my concern of the weight, but didn't seem an issue for him.
I recently ordered a 12v3.4ah battery+recharger and am still deciding how bright to go. I don't even need an hour per trip, so considering 35watts. The reason I like the 12v3.4ah is that it'll fit inside a water bottle (cage) and only weighs a couple pounds. Tripling that weight so I can pedal for 6 hours in the dark isn't interesting to me.
-Sean
Hi, Jake here,
I use lead-acid gel cells for power. Gel cells typically weigh 1 pound per Amp hour and a 20 watt bulb will burn for about 35 real world minutes per Amp hour. They are available in lots of sizes at Home Depot in the lighting section and are sold for emergency and exit lights. They are also used in computer UPSs and there is no cheaper rechargable power source.
I use a 7Ah battery to power my lights and charge it once a week. With an hour's ride in the evening I have plenty of juice. I made a 20 Watt light for my brother-in-law for his bike, his uses a 4 Amp hour gel cell. He has an hour commute and charges it daily while at work. My brother-in-law uses a 12 volt "wall wart" supply to charge his and I use a Vector "Smart" automotive battery charger.
While seven pounds may seem like a lot to a cyclist, it is really not. In reality it works out to a matter of seconds - important in a race - but not to a commuter. Better to see and be seen. When I flash the 50 watt high beam oncoming cars always dim their brights.
Hi Jake Here!
The links in the story all still work but I've moved the site to Jake's Recumbent Bicycle Projects
To answer the other questions: Battery is a 7 ah 12 volt gel cell which I just keep in my Hardshell bike trunk. For the highbeam switch I use a simple mini-toggle and a 12 volt relay. However, with an SPDT automotive switch you could eliminate the relay. -Jake
I use lead-acid gel cells for power as well. Is there any area I need to pay special attention? By the way, I have great resource for fioricet you may wish to check out. Thanks. BUY-fioricet
Here is an $10.98 garden spotlight from Lowes instead of Home Depot. (12 volt MR16 20 Watt bulb, fixture, adjustable base included) mounted on my electric bike:
http://www.healthebike.com/lafree/bikelight.JPG
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Trackback
TrackBack URL for this entry: http://mt.makezine.com/mt/mt-tb.cgi/1822New @ MAKE
Making Things Talk
Programming microcontrollers used to require an expensive development environment costing thousands of dollars and requiring professional electrical engineering expertise. Open-source physical computing platforms with simple i/o boards and development environments have led to new options for hobbyists, hackers, and makers. This book contains a series of projects that teach you what you need to know to get your creations talking to each other, connecting to the web, and forming networks of smart devices. Review and buy it now! - Link.
Eccentric Cubicle
Who says office cubicles need to be dreary? In this book, author Kaden Harris of Eccentric Genius introduces aspiring and die-hard Makers to a highly entertaining parallel universe of surreal office-based projects that are sure to pique the curiosity of even the most jaded office mates. From desktop guillotines and crossbows to mood-enhancing effects and music makers, each project presents a different set of challenges and opens new avenues of Maker lore - Link.
Best of MAKE
After two years, MAKE has become one of most celebrated new magazines to hit the newsstands, and certainly one of the hottest reads. If you're just catching on to the MAKE phenomenon and wonder what you've missed, this book contains the best DIY projects from the magazine's first ten volumes -- a surefire collection of fun and challenging activities going back to MAKE's launch in early 2005 - Link.
Illustrated Guide to Astronomical Wonders
Amateur astronomy is now within the reach of anyone, and this is the ideal book to get you started. The Illustrated Guide to Astronomical Wonders offers you a guide to the equipment you need, and shows you how and where to find hundreds of spectacular objects in the deep sky -- double and multiple stars as well as spectacular star clusters, nebulae, and galaxies - Link.
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Gareth Branwyn
Robot Maker
Jonah Brucker-Cohen
Researcher
Natalie Zee Drieu
Bre Pettis
Current Podcast
Make a Reprap Robot Part 1: The Electronics - Weekend Project Podcast
MP4 | Hi-Def | Blip | Youtube | PDF | Subscribe This week, take the first step towards making your own self-replicating rapid-prototyping robot! You can order up your boards, from the Reprap foundation or make your own since...
More...
